View STH80N10F7-2_8205729.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

this is information on a product in full production. february 2014 docid025865 rev 1 1/25 std80n10f7, stf80n10f7, STH80N10F7-2, stp80n10f7 n-channel 100 v, 0.008 typ., 80 a stripfet? vii deepgate? power mosfets in dpak, to-220fp, h 2 pak-2 and to-220 datasheet - production data figure 1. internal schematic diagram features ? extremely low gate charge ? ultra low on-resistance ? low gate input resistance applications ? switching applications description these devices utilize the 7 th generation of design rules of st?s proprietary stripfet? technology, with a new gate structure. the resulting power mosfet exhibits the lowest r ds(on) in all packages. to-220 dpak h pak-2 2 1 3 tab 1 2 3 tab 1 3 2 tab 1 2 3 to-220fp $0y '7$% * 6 '7$% * 6 + 3$. '3$.72dqg 72)3qr7$% order codes v ds @ t jmax r ds(on) max i d p tot std80n10f7 100 v 0.01 70 a 85 w stf80n10f7 0.01 40 a 30 w STH80N10F7-2 0.0095 80 a 110 w stp80n10f7 0.01 table 1. device summary order codes marking package packaging std80n10f7 80n10f7 dpak tape and reel stf80n10f7 to-220fp tube STH80N10F7-2 h 2 pak-2 tape and reel stp80n10f7 to-220 tube www.st.com
contents std80n10f7, stf80n10f7, STH80N10F7-2, stp80n10f7 2/25 docid025865 rev 1 contents 1 electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 3 test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 4 package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 5 packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 6 revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
docid025865 rev 1 3/25 std80n10f7, stf80n10f7, STH80N10F7-2, stp80n10f7 electrical ratings 25 1 electrical ratings table 2. absolute maximum ratings symbol parameter value unit dpak h 2 pak-2 to-220 to-220fp v ds drain-source voltage 100 v v gs gate-source voltage 20 v i d drain current (continuous) at t c = 25 c 70 80 40 a i d drain current (continuous) at t c = 100 c 48 54 30 a i dm (1) 1. pulse width limited by safe operating area. drain current (pulsed) 280 320 160 a p tot total dissipation at t c = 25 c 85 110 30 w t stg storage temperature - 55 to 175 c t j max. operating junction temperature table 3. thermal data symbol parameter value unit dpak to-220fp h 2 pak-2 to-220 r thj-pcb thermal resistance junction-pcb max 50 35 c/w r thj-amb thermal resistance junction-ambient max 62.5 62.5 c/w r thj-case thermal resistance junction-case max 1.76 5 1.36 c/w
electrical characteristics std80n10f7, stf80n10f7, STH80N10F7-2, stp80n10f7 4/25 docid025865 rev 1 2 electrical characteristics (t c = 25 c unless otherwise specified) table 4. on /off states symbol parameter test conditions min. typ. max. unit v (br)dss drain-source breakdown voltage i d = 250 a , v gs = 0 100 v i dss zero gate voltage drain current (v gs = 0) v ds = 100 v v ds = 100 v, t c =125 c 1 100 a a i gss gate-body leakage current (v ds = 0) v gs = 20 v 100 a v gs(th) gate threshold voltage v ds = v gs , i d = 250 a 2.5 3.5 4.5 v r ds(on) static drain-source on-resistance for dpak, to-220 and to-220fp: i d = 40 a, v gs =10 v 0.0085 0.010 for h 2 pak-2: v gs =10 v, i d =40 a 0.008 0.0095 table 5. dynamic symbol parameter test conditions min. typ. max. unit c iss input capacitance v ds = 50 v, f = 1 mhz, v gs = 0 - 3100 - pf c oss output capacitance - 700 - pf c rss reverse transfer capacitance -45-pf q g total gate charge v dd = 50 v, i d = 80 a, v gs = 10 v (see figure 18 ) -45-nc q gs gate-source charge - 18 - nc q gd gate-drain charge - 13 - nc table 6. switching times symbol parameter test conditions min. typ. max. unit t d (on) turn-on delay time v dd = 50 v, i d = 40 a, r g = 4.7 , v gs = 10 v (see figure 19 and figure 22 ) -19-ns t r rise time - 32 - ns t d (off) turn-off delay time - 36 - ns t f fall time - 13 - ns
docid025865 rev 1 5/25 std80n10f7, stf80n10f7, STH80N10F7-2, stp80n10f7 electrical characteristics 25 table 7. source drain diode symbol parameter test conditions min. typ. max. unit i sd source-drain current - 80 a i sdm (1) 1. pulse width limited by safe operating area. source-drain current (pulsed) - 320 a v sd (2) 2. pulsed: pulse duration = 300 s, duty cycle 1.5% forward on voltage i sd = 80 a, v gs = 0 - 1.1 v t rr reverse recovery time i sd = 80 a, di/dt = 100 a/ s v dd = 80 v, t j =150 c (see figure 22 ) -70 ns q rr reverse recovery charge - 125 nc i rrm reverse recovery current - 3.6 a
electrical characteristics std80n10f7, stf80n10f7, STH80N10F7-2, stp80n10f7 6/25 docid025865 rev 1 2.1 electrical characteristics (curves) figure 2. safe operating area for dpak, h 2 pak-2 and to-220 figure 3. thermal impedance for dpak, h 2 pak-2 and to-220 i d 100 10 1 0.1 0.1 1 v ds (v) 10 (a) operation in this area is limited by max r ds(on) 100 s 1ms tj=175c tc=25c sinlge pulse 10ms gipd220720131539fsr single pulse =0.5 0.05 0.02 0.01 0.1 0.2 k 10 t p (s) -4 10 -3 10 -1 10 -5 10 -2 10 -2 10 -1 10 0 c am18025v1 figure 4. safe operating area for to-220fp figure 5. thermal impedance for to-220fp i d 100 10 1 0.1 0.1 1 v ds (v) 10 (a) operation in this area is limited by max r ds(on) 100s 1ms tj=175c tc=25c sinlge pulse 10ms am15983v1 single pulse =0.5 0.05 0.02 0.01 0.1 0.2 k 10 t p (s) -4 10 -3 10 -2 10 -5 10 -3 10 -2 10 -1 10 0 c 10 -1 am18026v1 figure 6. output characteristics figure 7. transfer characteristics i d 300 200 100 0 0 4 v ds (v) 8 (a) 2 6 5v 250 150 50 6v 7v 8v 9v v gs =10 v am15971v1 i d 300 200 100 0 4 v gs (v) 8 (a) 2 6 50 150 250 v ds =9v 10 am15972v1
docid025865 rev 1 7/25 std80n10f7, stf80n10f7, STH80N10F7-2, stp80n10f7 electrical characteristics 25 figure 8. static drain-source on-resistance for dpak and to-220 figure 9. static drain-source on-resistance for h 2 pak-2 r ds(on) 8.1 7.9 7.7 7.5 0 80 i d (a) ( m ) 40 8.3 8.5 v gs =10v 20 60 8.7 8.9 9.1 am18070v1 r ds(on) 7.6 7.4 7.2 7.0 0 80 i d (a) ( m ) 40 7.8 8.0 v gs =10v 20 60 8.2 8.4 8.6 am15973v1 figure 10. static drain-source on-resistance for to-220fp figure 11. gate charge vs gate-source voltage r ds(on) 8.1 7.9 7.7 7.5 0 20 i d (a) ( m ) 10 8.3 v gs =10v 5 15 8.5 25 30 8.7 8.9 9.1 am15984v1 v gs 6 4 2 0 0 10 q g (nc) (v) 40 8 20 30 10 v dd =50v i d =80a 12 50 am15974v1
electrical characteristics std80n10f7, stf80n10f7, STH80N10F7-2, stp80n10f7 8/25 docid025865 rev 1 figure 12. capacitance variations figure 13. normalized gate threshold voltage vs temperature c 1500 1000 500 0 0 40 v ds (v) (pf) 20 2000 60 ciss coss crss 80 2500 3000 3500 am15975v1 v gs(th) 0.8 0.6 0.4 0.2 -55 -5 t j (c) (norm) -30 1 70 20 45 95 i d =250a 0 120 1.2 am15976v1 figure 14. normalized on-resistance vs temperature figure 15. source-drain diode forward characteristics figure 16. normalized v ds vs temperature r ds(on) 0.5 0 t j (c) (norm) i d =40a 1 -55 -5 -30 70 20 45 95 120 1.5 2 v gs =10v am15977v1 v sd 0 40 i sd (a) (v) 20 60 80 0.6 0.7 0.8 0.9 t j =-55c t j =150c t j =25c 0.5 1 1.1 am15978v1 v ds t j (c) (norm) 0.96 0.97 0.98 0.99 1 i d =1ma -55 -5 -30 70 20 45 95 120 1.01 1.02 1.03 1.04 am15979v1
docid025865 rev 1 9/25 std80n10f7, stf80n10f7, STH80N10F7-2, stp80n10f7 test circuits 25 3 test circuits figure 17. switching times test circuit for resistive load figure 18. gate charge test circuit figure 19. test circuit for inductive load switching and diode recovery times figure 20. unclamped inductive load test circuit figure 21. unclamped inductive waveform figure 22. switching time waveform am01468v1 v gs p w v d r g r l d.u.t. 2200 f 3.3 f v dd am01469v1 v dd 47k 1k 47k 2.7k 1k 12v v i =20v=v gmax 2200 f p w i g =const 100 100nf d.u.t. v g am01470v1 a d d.u.t. s b g 25 a a b b r g g fast diode d s l=100 h f 3.3 1000 f v dd am01471v1 v i p w v d i d d.u.t. l 2200 f 3.3 f v dd am01472v1 v (br)dss v dd v dd v d i dm i d am01473v1 v ds t on td on td off t off t f t r 90% 10% 10% 0 0 90% 90% 10% v gs
package mechanical data std80n10f7, stf80n10f7, STH80N10F7-2, stp80n10f7 10/25 docid025865 rev 1 4 package mechanical data in order to meet environmental requirements, st offers these devices in different grades of ecopack ? packages, depending on their level of environmental compliance. ecopack ? specifications, grade definitions and product status are available at: www.st.com . ecopack ? is an st trademark.
docid025865 rev 1 11/25 std80n10f7, stf80n10f7, STH80N10F7-2, stp80n10f7 package mechanical data 25 figure 23. to-220fp drawing 7012510_rev_k_b
package mechanical data std80n10f7, stf80n10f7, STH80N10F7-2, stp80n10f7 12/25 docid025865 rev 1 table 8. to-220fp mechanical data dim. mm min. typ. max. a4.4 4.6 b2.5 2.7 d2.5 2.75 e 0.45 0.7 f0.75 1 f1 1.15 1.70 f2 1.15 1.70 g 4.95 5.2 g1 2.4 2.7 h10 10.4 l2 16 l3 28.6 30.6 l4 9.8 10.6 l5 2.9 3.6 l6 15.9 16.4 l7 9 9.3 dia 3 3.2
docid025865 rev 1 13/25 std80n10f7, stf80n10f7, STH80N10F7-2, stp80n10f7 package mechanical data 25 figure 24. dpak (to-252) type a drawing 0068772_m_type_a
package mechanical data std80n10f7, stf80n10f7, STH80N10F7-2, stp80n10f7 14/25 docid025865 rev 1 table 9. dpak (to-252) type a mechanical data dim. mm min. typ. max. a2.20 2.40 a1 0.90 1.10 a2 0.03 0.23 b0.64 0.90 b4 5.20 5.40 c0.45 0.60 c2 0.48 0.60 d6.00 6.20 d1 5.10 e6.40 6.60 e1 4.70 e2.28 e1 4.40 4.60 h 9.35 10.10 l1.00 1.50 (l1) 2.80 l2 0.80 l4 0.60 1.00 r0.20 v2 0 8
docid025865 rev 1 15/25 std80n10f7, stf80n10f7, STH80N10F7-2, stp80n10f7 package mechanical data 25 figure 25. dpak (to-252) type a footprint (a) a. all dimensions are in millimeters footprint_rev_m_type_a
package mechanical data std80n10f7, stf80n10f7, STH80N10F7-2, stp80n10f7 16/25 docid025865 rev 1 figure 26. h2pak-2 drawing 8159712_c
docid025865 rev 1 17/25 std80n10f7, stf80n10f7, STH80N10F7-2, stp80n10f7 package mechanical data 25 table 10. h2pak-2 mechanical data dim. mm min. typ. max. a4.30 - 4.80 a1 0.03 0.20 c1.17 1.37 e4.98 5.18 e0.50 0.90 f0.78 0.85 h 10.00 10.40 h1 7.40 7.80 l 15.30 15.80 l1 1.27 1.40 l2 4.93 5.23 l3 6.85 7.25 l4 1.5 1.7 m2.6 2.9 r0.20 0.60 v0 8
package mechanical data std80n10f7, stf80n10f7, STH80N10F7-2, stp80n10f7 18/25 docid025865 rev 1 figure 27. h2pak-2 recommended footprint (dimensions are in mm) 8159712_c
docid025865 rev 1 19/25 std80n10f7, stf80n10f7, STH80N10F7-2, stp80n10f7 package mechanical data 25 figure 28. to-220 type a drawing bw\sh$b5hyb7
package mechanical data std80n10f7, stf80n10f7, STH80N10F7-2, stp80n10f7 20/25 docid025865 rev 1 table 11. to-220 type a mechanical data dim. mm min. typ. max. a4.40 4.60 b0.61 0.88 b1 1.14 1.70 c0.48 0.70 d 15.25 15.75 d1 1.27 e 10 10.40 e2.40 2.70 e1 4.95 5.15 f1.23 1.32 h1 6.20 6.60 j1 2.40 2.72 l13 14 l1 3.50 3.93 l20 16.40 l30 28.90 ? p3.75 3.85 q2.65 2.95
docid025865 rev 1 21/25 std80n10f7, stf80n10f7, STH80N10F7-2, stp80n10f7 packaging mechanical data 25 5 packaging mechanical data figure 29. tape for dpak (to-252) p1 a0 d1 p0 f w e d b0 k0 t user direction of feed p2 10 pitches cumulative tolerance on tape +/- 0.2 mm user direction of feed r bending radius b1 for machine ref. only including draft and radii concentric around b0 am08852v1 top cover tape
packaging mechanical data std80n10f7, stf80n10f7, STH80N10F7-2, stp80n10f7 22/25 docid025865 rev 1 figure 30. reel for dpak (to-252) table 12. dpak (to-252) tape and reel mechanical data tape reel dim. mm dim. mm min. max. min. max. a0 6.8 7 a 330 b0 10.4 10.6 b 1.5 b1 12.1 c 12.8 13.2 d 1.5 1.6 d 20.2 d1 1.5 g 16.4 18.4 e 1.65 1.85 n 50 f 7.4 7.6 t 22.4 k0 2.55 2.75 p0 3.9 4.1 base qty. 2500 p1 7.9 8.1 bulk qty. 2500 p2 1.9 2.1 r40 t 0.25 0.35 w 15.7 16.3 a d b full radius g measured at hub c n reel dimensions 40mm min. access hole at slot location t tape slot in core for tape start 25 mm min. width am08851v2
docid025865 rev 1 23/25 std80n10f7, stf80n10f7, STH80N10F7-2, stp80n10f7 packaging mechanical data 25 table 13. h2pak-2 tape and reel mechanical data tape reel dim. mm dim. mm min. max. min. max. a0 10.5 10.7 a 330 b0 15.7 15.9 b 1.5 d 1.5 1.6 c 12.8 13.2 d1 1.59 1.61 d 20.2 e 1.65 1.85 g 24.4 26.4 f 11.4 11.6 n 100 k0 4.8 5.0 t 30.4 p0 3.9 4.1 p1 11.9 12.1 base qty 1000 p2 1.9 2.1 bulk qty 1000 r50 t 0.25 0.35 w 23.7 24.3
revision history std80n10f7, stf80n10f7, STH80N10F7-2, stp80n10f7 24/25 docid025865 rev 1 6 revision history table 14. document revision history date revision changes 07-feb-2014 1 first release.
docid025865 rev 1 25/25 std80n10f7, stf80n10f7, STH80N10F7-2, stp80n10f7 25 please read carefully: information in this document is provided solely in connection with st products. stmicroelectronics nv and its subsidiaries (?st ?) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described he rein at any time, without notice. all st products are sold pursuant to st?s terms and conditions of sale. purchasers are solely responsible for the choice, selection and use of the st products and services described herein, and st as sumes no liability whatsoever relating to the choice, selection or use of the st products and services described herein. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. i f any part of this document refers to any third party products or services it shall not be deemed a license grant by st for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoev er of such third party products or services or any intellectual property contained therein. unless otherwise set forth in st?s terms and conditions of sale st disclaims any express or implied warranty with respect to the use and/or sale of st products including without limitation implied warranties of merchantability, fitness for a particular purpose (and their equivalents under the laws of any jurisdiction), or infringement of any patent, copyright or other intellectual property right. st products are not designed or authorized for use in: (a) safety critical applications such as life supporting, active implanted devices or systems with product functional safety requirements; (b) aeronautic applications; (c) automotive applications or environments, and/or (d) aerospace applications or environments. where st products are not designed for such use, the purchaser shall use products at purchaser?s sole risk, even if st has been informed in writing of such usage, unless a product is expressly designated by st as being intended for ?automotive, automotive safety or medical? industry domains according to st product design specifications. products formally escc, qml or jan qualified are deemed suitable for use in aerospace by the corresponding governmental agency. resale of st products with provisions different from the statem ents and/or technical features set forth in this document shall immediately void any warranty granted by st for the st product or service described herein and shall not create or extend in any manner whatsoev er, any liability of st. st and the st logo are trademarks or register ed trademarks of st in various countries. information in this document supersedes and replaces all information previously supplied. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners. ? 2014 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - ital y - japan - malaysia - malta - morocco - philippines - singapore - spain - swed en - switzerland - united kingdom - united states of america www.st.com

▲Up To Search▲

Price & Availability of STH80N10F7-2

	To Download STH80N10F7-2 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .